Poolside Portable Pumps Fireman tries to bring fire under control. Fire preparedness fire pumps.
Empower your pool water to protect your home and property HOME PRODUCT ABOUT US CONTACT VIDEOS
Pool side portable fire pumps logo
Phone Poolside Portable Pumps at 858 513 2677

CET Models

pfp-9hp-dsl

PFP-9hp-DSL

Engine specifications

  • Yanmar 9hp at 3600 RPM, air cooled engine.
  • Single cylinder diesel engine.
  • 12V electric start with recoil start as backup.
  • 1.45 gallons (5.5 l) integrated fuel tank.

Pump unit specifications

  • Direct drive C.E.T. single stage centrifugal pump.
  • Pump body made from resistant aluminum alloy.
  • Bronze impeller.
  • Mechanical shaft seal.
  • Exhaust priming system, guaranteed up to 20' (6 meters) lift.
  • One 2 1/2" (65 mm) delivery outlet with 1/4- turn ball valve.
  • One 3" (77 mm) suction intlet.
  • Dimensions: Length: 20 1/2" (520 mm) Width: 25 7/8" (657 mm) Height: 24 5/8" (625 mm).
  • Weight: 190 lbs. (86 kg)

$6.500.00

 

Performance
pfp-11hpHND-m

PFP-11hpHND-M

Engine specifications

  • Honda 11hp at 3600 RPM, air cooled engine.
  • Single cylinder gasoline engine.
  • 6 quarts (6.5 l) integrated fuel tank.

Pump unit specifications

  • Direct drive C.E.T. single stage centrifugal pump.
  • Pump body made from resistant aluminum alloy.
  • Bronze impeller.
  • Mechanical shaft seal.
  • Exhaust priming system, guaranteed up to 20' (6 meters) lift.
  • One 2 1/2" (65 mm) delivery outlet with 1/4-turn valve.
  • One 2 1/2" (65 mm) suction intlet.
  • Dimensions: Lenght 23 1/4" (590 mm) Width: 22 3/8" (568 mm) Height: 23 5/8" (600 mm).
  • Weight: 125 lbs. (57 kg).

$3.385.00

 

11HP HND M
pfp-11hpHnd-m-hp

PFP-11hpHND-M-HP

Engine specifications

  • Honda 11hp at 3600 RPM, air cooled engine.
  • Single cylinder gasoline engine.
  • 6 quarts (6.5 l) integrated fuel tank.

Pump unit specifications

  • Transmission drive C.E.T. single centrifugal pump.
  • Pump body made from resistant aluminum alloy.
  • Bronze impeller.
  • Mechanical shaft seal.
  • Stainless steel pump shaft.
  • Belt drive transmission.
  • Exhaust priming system, guaranteed up to 15' (4.5 meters) lift.
  • One 1 1/2" (38 mm) delivery outlet with 1/4-turn ball valve.
  • One 2 1/2" (65 mm) suction intlet.
  • Dimensions: Length: 24" (609 mm) Width: 26 3/4" (679 mm) Height: 23 7/8" (606 mm).
  • Weight: 160 lbs (73 kg).

$4.295.00

 

11HP HND HP
Drop in unit One

Drop-In Unit 1

Pump unit specifications

  • 200 fully baffled propopylene water tank
  • 6.5hp twin impeller fire pump
  • 70gpm at 10psi, 40gpm at 100psi and 20gpm at 125psi
  • 1.5 gallons integrated fuel tank
  • Lighted control panel
  • Low profile electric rewind hose reel
  • 1 inch x 100 foot booster hose
  • 2.5 inch tank to pump ? turn ball valve
  • Multiple outlets manifold
  • 1.5 inch service line with cap and chain

Drop In Unit Two

Drop-In Unit 2

Pump unit specifications

  • 200 fully baffled propopylene water tank
  • 20hp mid range fire pump
  • 265gpm at 50psi, 190gpm at 100psi, 115gpm at 150psi and 45gpm at 200psi
  • 3 gallon fuel tank
  • Lighted control panel
  • Low profile electric rewind hose reel
  • 1 inch x 100 foot booster hose
  • 2.5 inch tank to pump 1/4 turn ball valve
  • Steel manifold with multiple outlets
  • 1.5 inch service line with cap and chain
  • 3/4 inch pressurized garden hose connection
 
 

Store demos available
Water tanks on site

Demo your pump before you take it home. Delivery, demo, and set up: no extra charge. In San Diego North county ONLY.

NOTE: THE PSI & GPM IS @ THE PUMP. DEPENDING ON THE:

  • THROTTLE SETTING :
  • AIR TEMPERATURE :
  • ALTITUDE :
  • HOSE LENGTHS :

THE PERFORMANCE MAY VERY

 
sales@poolsideportablepumps.com
sales@poolsideportablepumps.com